Research on Key Technologies for Improving the Accuracy of Unmanned Aerial Vehicle Layout

Authors

Wang Liu China Communications Second Highway Bureau Third Engineering Co., LTD, Xi'an Shaanxi 710000, China
Sha Huang School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Xi'an Shaanxi 710021, China
Yayun Bian China Communications Second Highway Bureau Third Engineering Co., LTD, Xi'an Shaanxi 710000, China
Ying Chen China Communications Second Highway Bureau Third Engineering Co., LTD, Xi'an Shaanxi 710000, China

DOI:

https://doi.org/10.53469/wjimt.2025.08(05).19

Keywords:

Drone layout, Accuracy enhancement, Sensor optimization, Data processing, Engineering application

Abstract

This article focuses on the issue of improving the accuracy of drone layout technology. It addresses the insufficient accuracy in existing technologies and discusses key factors affecting the accuracy of drone layout from multiple dimensions such as hardware, software, and environment, proposing corresponding improvement strategies. In the conceptual overview, the basic principles and processes of drone layout are clarified, emphasizing the importance of sensor configuration and data processing. Subsequently, in the theoretical analysis, systematic research proposes solutions such as optimizing sensor performance, improving algorithm models, and enhancing system integration. The empirical study designs diverse experimental scenarios to verify the practical effects of the aforementioned methods; the experimental results and analysis section presents specific data, proving the effectiveness of the proposed technology and evaluating its engineering applicability. In the conclusion and discussion, the research findings are summarized, the limitations of the current study are pointed out, and suggestions for future research directions are proposed. This article aims to provide scientific basis and technical support for drone layout technology to facilitate its widespread application in modern engineering fields.

References

Maghazei, O., & Netland, T. (2020). Drones in manufacturing: Exploring opportunities for research and practice. Journal of Manufacturing Technology Management, 31(6), 1217-1235.

Nouacer, R., Hussein, M., Espinoza, H., & Corradi, F. (2020). Towards a framework of key technologies for drones. Microprocessors and Microsystems, 75, 103073.

Zhu, H., Nie, H., Zhang, L., Wei, X., & Zhang, M. (2020). Design and assessment of octocopter drones with improved aerodynamic efficiency and performance. Aerospace Science and Technology, 106, 106154.

Duffy, J. P., Cunliffe, A. M., DeBell, L., & Sandbrook, C. (2018). Location, location, location: Considerations when using lightweight drones in challenging environments. Remote Sensing in Ecology and Conservation, 4(1), 7-19.

Hussein, M., Nouacer, R., Corradi, F., Ouhammou, Y., & Castrillo, G. (2021). Key technologies for safe and autonomous drones. Microprocessors and Microsystems, 80, 103365.

Zhu, Y. W. (2016). Research on key technologies of UAV systems. Journal of Beijing Institute of Technology, 36(S1), 12-18.

Qiu, D. H. (2018). Research on key technologies of UAV takeoff/landing taxiing and shock absorption [Doctoral dissertation, Changchun Institute of Optics, Fine Mechanics and Physics, CAS].

Fan, Y. J., & Zhang, Q. C.(2018). Key technologies of UAV aerial survey image matching. Electronic Measurement Technology, 41(5), 89-94.

Hu, C. C. (2023). Research on deployment optimization of air-ground cooperative unmanned systems [Master’s thesis, Nanjing University of Information Science & Technology].

Chen, F. Y. (2020). Research on image processing technology for UAV autonomous precision landing [Master’s thesis, Shandong University].

Sun, H. (2018). Research on key technologies of UAV short-distance landing fault-tolerant control [Doctoral dissertation, Northwestern Polytechnical University].

Li, J. D. (2020). Research on key technologies of UAV flight control systems. Technology Wind, 2020(3), 45-47.

Sun, X. S., Liu, S. H., & Liu, L.(2020). Research on key technologies of UAV flight control systems. Wireless Internet Technology, 17(18), 23-25.

Zeng, Q. (2019). Research on UAV-assisted cooperative communication key technologies [Doctoral dissertation, University of Science and Technology Beijing].

Xu, H. W., Li, P., & Wang, X. (2018). Research on key technologies of UAV-borne air-to-ground missiles. Journal of Projectiles, Rockets, Missiles and Guidance, 38(4), 45-48.

Dai, F. X. (2007). Research on key technologies of UAV-borne multispectral imager [Master’s thesis, Shanghai Institute of Technical Physics, CAS].

Yuan, Y. J. (2019). Research and implementation of UAV image precise registration [Technical report, Shanghai Advanced Research Institute, CAS].

Hou, X. Y. (2022). Research on key technologies of UAV target recognition and counting [Technical report, Shanghai Advanced Research Institute, CAS].

Li, Y. (2018). Analysis of key technologies in UAV aerial remote sensing systems. Urban Geography, 2018(12), 156-157.

Chen, Z. B. [陈在斌]. (2020). Research on key technologies of tilt-rotor UAV control systems [Doctoral dissertation, Changchun Institute of Optics, Fine Mechanics and Physics, CAS].

Li, J. [李炯]. (2009). Research on microwave guidance technology for UAV landing systems [Master’s thesis, Institute of Electronics, CAS].

Duan, Z. [段镇]. (2014). Research on key technologies of UAV flight control systems [Doctoral dissertation, Changchun Institute of Optics, Fine Mechanics and Physics, CAS].

Zhao, G. J. [赵广健]. (2019). Research and practice of UAV equipment technology. Southern Agricultural Machinery, 50(15), 123-124.

Cao, H. T. [曹洪涛]. (2022). Key technologies for radiometric consistency correction of UAV optical remote sensing [Doctoral dissertation, Aerospace Information Research Institute, CAS].

Zhang, Y. [张郁]. (2018). Accuracy analysis of UAV low-altitude photogrammetry. Geomatics and Information Science of Wuhan University, 43(S1), 89-93.

Pan, J. H., Zhang, S. B., & Wang, D. H. [潘计辉, 张盛兵, 王党辉]. (2018). Fault-tolerant technology research for flight control systems of high-altitude long-endurance UAVs. Journal of Northwestern Polytechnical University, 36(3), 456-461.

Zhang, B. G. [张宝钢]. (2011). Key technologies for aeromagnetic data preprocessing of fixed-wing UAVs (Technical Report No. RS-2011-028) [Institute of Remote Sensing Applications, CAS].

Teng, Y. K. [滕玉坤]. (2019). Research on key visual measurement technologies for UAV aerial refueling [Doctoral dissertation, Shenyang Institute of Automation, CAS].

Wang, F., Qi, S. J., & Wu, X. L. [王锋, 祁圣君, 吴欣龙]. (2018). Research and prospects of UAV flight quality. Aerodynamic Missile Journal, 2018(5), 34-38.

Zhao, W. W. [赵伟伟]. (2020). Research on formation and obstacle avoidance control for UAV swarms [Doctoral dissertation, Changchun Institute of Optics, Fine Mechanics and Physics, CAS].

Wang, J., Zou, M., & Yang, Y. [王俊, 邹萌, 杨莹]. (2018). Technical discussion on UAV in large-scale mapping. Resources Guide, 2018(9), 45-47.

Zhou, H. X. [周鸿翔]. (2019). Quality evaluation of UAV remote sensing orthophotos. Geomatics & Spatial Information Technology, 42(5), 112-115.

Yu, Y. F., & Wang, L. [郁一帆, 王磊]. (2019). New trends in UAV technology development. Aerodynamic Missile Journal, 2019(6), 23-27.

Wu, X. L. [吴欣龙]. (2019). Research on flight quality standards for UAV systems. Aeronautical Standardization & Quality, 2019(4), 23-26.

Zhang, C. H. [张长海]. (2019). Research on UAV aerial remote sensing technology. North China Natural Resources, 2019(4), 89-91.

Lai, C. X. [赖春晓]. (2021). Key technologies and engineering applications of UAV oblique photogrammetry. Architecture and Decoration.

Research on Key Technologies for Improving the Accuracy of Unmanned Aerial Vehicle Layout